









Quick Attach | Quick Mill Skid Steer Cold Planer
Estimated shipping only — your final shipping cost is confirmed at checkout.
The Quick Attach Quick Mill Skid Steer Cold Planer is built for controlled milling of asphalt and concrete during pavement repair, resurfacing, utility work, bridge deck maintenance, and commercial site preparation. Available in 18″-48″ cutting widths, every model can mill up to 6″ deep, and uses hydraulic adjustments to help the operator control depth, tilt, and cutting position from the cab.
A 24″ hydraulic side shift helps position the drum around curbs, manholes, storm drains, walls, and other obstacles without constantly repositioning the skid steer. The solid drum and planetary drive are designed for demanding milling work, while independently controlled depth shoes help maintain a consistent cut across larger surfaces.
Features
- Four Cutting Widths: Available in 18″, 24″, 36″, and 48″ configurations.
- Up to 6″ Cutting Depth: All four models provide a 0–6″ milling depth.
- Hydraulic Depth Control: Independently controlled left and right shoes help maintain the desired cutting depth.
- 24″ Hydraulic Side Shift: Moves the planer laterally for working close to curbs, walls, drains, and other obstacles.
- Hydraulic Tilt Control: Adjust the milling head angle for tapered cuts, transitions, and uneven surfaces.
- Planetary Drum Drive: Designed to provide strong torque for asphalt and concrete milling.
- Solid Drum Design: Produces fine aggregate while directing milled material toward the rear to reduce re-milling.
- Asphalt and Concrete Capability: One attachment can handle both common pavement materials.
- Case Drain Required: Designed for appropriately equipped high-flow skid steers and compact track loaders.
- Replaceable Cutting Teeth: Individual cutting teeth can be serviced as they wear.
- Universal Skid Steer Mount: Built for common skid steer quick-attach systems.
- Made in the USA: Manufactured by Quick Attach.
- Models: CP18 | CP24 | CP36 | CP48
- Cutting Widths: 18″ | 24″ | 36″ | 48″
- Cutting Depth: 0–6″
- Depth Control: Hydraulic
- Side Shift: 24″ Hydraulic
- Tilt Control: Hydraulic
- Case Drain: Required
- CP18 Hydraulic Flow: 22–40 GPM
- CP24 / CP36 / CP48 Hydraulic Flow: 25–45 GPM
- CP18 Hydraulic Pressure: 2,800–6,525 PSI
- CP24 / CP36 / CP48 Hydraulic Pressure: 3,000–6,525 PSI
- Tilt: 16° on CP18 and CP24 | 8° on CP36 and CP48
- Cutting Teeth: 48 CP18 | 60 CP24 | 78 CP36 | 90 CP48
What is the difference between the CP18, CP24, CP36, and CP48?
The primary difference is cutting width. The models mill 18″, 24″, 36″, or 48″ wide in a pass. The larger models also require more hydraulic flow and are substantially heavier, so the machine needs to be matched to the selected planer.
How deep can the Quick Mill cut?
All four models can mill from the surface down to approximately 6″ deep.
Can it mill both asphalt and concrete?
Yes. The Quick Mill is designed for both asphalt and concrete milling, making it useful for pavement removal, repair preparation, resurfacing, and similar work.
What does the hydraulic side shift do?
The planer can move up to 24″ laterally, allowing the cutting drum to work closer to curbs, walls, manholes, storm drains, and other fixed obstacles without moving the entire skid steer.
What does the hydraulic tilt do?
Hydraulic tilt changes the angle of the cutting head. It can be useful for tapered cuts, pavement transitions, matching adjoining surfaces, and working across uneven areas.
Why are the left and right depth shoes independently controlled?
Independent depth adjustment allows the operator to maintain a consistent milling depth even when one side of the planer is traveling over an already milled surface. It also helps with tapered and transition cuts.
Does the Quick Mill require high-flow hydraulics?
Yes. The CP18 requires approximately 22–40 GPM, while the CP24, CP36, and CP48 require approximately 25–45 GPM.
Is a case drain required?
Yes. All Quick Mill models require a case drain.
Will I need a control harness?
That depends on the skid steer. Quick Attach offers a pistol-grip control harness and loader-specific wire harnesses for machines that require additional electrical control of the planer’s hydraulic functions.
Can it mill around manholes and storm drains?
Yes. The combination of hydraulic side shift, depth control, and tilt is particularly useful for milling around fixed pavement features and in areas where a larger dedicated milling machine may be difficult to position.
Note: The Quick Mill is a high-flow attachment. Machine compatibility depends on actual auxiliary flow, hydraulic pressure, case-drain availability, electrical controls, operating capacity, and the selected planer size. Verify the machine’s hydraulic package before ordering.
Common Compatible Machines
Bobcat: S76, S86, T76, T86
Caterpillar: 262D3, 272D3, 289D3, 299D3, 255, 265, 275, 285
John Deere: 330G, 332G, 331G, 333G, 331 P, 333 P, 335 P
Kubota: SSV75, SVL75-3, SVL97-3
CASE: SR240B, SR270B, SV280B, SV340B, TR340B, TV370B, TV450B, TV620B
New Holland: L328, L334, C332, C337, C345
Takeuchi: TL10V2, TL12R2, TL12V2
ASV: RT-75, RT-135, VT-80, VT-100
JCB: 270, 300, 270T, 300T, 325T
Wacker Neuson: SW28, SW32, ST45, ST50
Yanmar: TL80VS, TL100VS
Quick Attach provides a 2-year manufacturer warranty against defects in materials and workmanship for the original purchaser.
Mill With More Control
Hydraulic depth, tilt, and side-shift adjustments let the operator position the drum around pavement features and changing grades without relying entirely on skid steer positioning.
Choose the Width Around the Job
The 18″ and 24″ models are useful where maneuverability and narrower cuts matter, while the 36″ and 48″ planers cover substantially more surface per pass on larger pavement-removal and resurfacing jobs.
Handle Asphalt and Concrete With One Attachment
The Quick Mill can move between asphalt and concrete work without requiring a separate planer for each pavement type.
Create Consistent Milling Depths
Independently controlled depth shoes help maintain a uniform cut across large areas and make it easier to transition between milled and unmilled surfaces.
- Asphalt milling
- Concrete milling
- Road repair
- Parking lot repair
- Bridge deck work
- Utility restoration
- Pavement patch preparation
- Trip-hazard removal
- Surface preparation
- Municipal maintenance
- Commercial construction
- Resurfacing preparation

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.

