





















































Reaper Attachments | EXF Excavator Brush Cutter
Estimated shipping only — your final shipping cost is confirmed at checkout.
The Reaper EXF Excavator Flail Mower is built for clearing and mulching heavy grass, brush, saplings, and woody growth with a compact excavator or backhoe. The excavator-mounted design lets operators work along roadsides, fence lines, ditches, slopes, trails, and wooded areas, while the flail cutting system mulches material as it cuts. The mower can also be operated overhead for trimming branches and vegetation that would be difficult to reach with a ground-level mower.
Choose between the 30-inch EXF-30 and 40-inch EXF-40 based on your machine and hydraulic capacity. The EXF-30 weighs 411 pounds plus the mount and requires 13–25 GPM, making it the lighter option for smaller excavators. The larger EXF-40 weighs 557 pounds plus the mount, requires 20–44 GPM, and provides a wider cutting path for machines that can support the additional weight and hydraulic demand. Both models can cut and mulch material up to 6 inches, use heavy 2-pound flail blades, and are available with an optional thumb saddle for grabbing and moving material with the excavator’s existing thumb.
Features
- Two Sizes Available: Choose the 30-inch EXF-30 or 40-inch EXF-40 to match the mower to your excavator, hydraulic system, and desired cutting width.
- Up to 6-Inch Cutting Capacity: Both models can tackle woody material up to 6 inches with appropriate hydraulic power and operating technique.
- Heavy-Duty Flail Blades: 2-pound flail knives cut and mulch grass, brush, shrubs, and woody vegetation.
- Direct-Drive System: Reduces drivetrain components and wear parts while transferring hydraulic power directly to the cutter shaft.
- Precision-Balanced Cutter Shaft: Reaper balances the rotating assembly to reduce vibration and provide smoother operation.
- Optional Thumb Saddle: Gives your excavator’s existing thumb a reinforced surface to close against, allowing you to grab and move logs, rocks, limbs, and debris without changing attachments.
- Replaceable AR500 Skid Shoes: Protect high-wear areas of the mower housing and can be replaced as they wear.
- Wire-Proof Wear Cone: Helps protect the drive area from wire and other material that can wrap around rotating components.
- Custom Bolt-On Mount: Allows the mower to be configured for different excavator and backhoe mounting setups.
- Overhead Cutting Capability: The excavator boom allows the mower to be positioned for trimming overhead brush and vegetation as well as cutting at ground level.
- American Made: Manufactured by Reaper Attachments in the USA.
EXF-30 – 30″
- Cutting Width: 30″
- Weight: 411 lbs. plus mount
- Weight With Thumb Saddle: 455 lbs. plus mount
- Cutting Capacity: Up to 6″
- Hydraulic Flow: 13–25 GPM
- Hydraulic Pressure: 3,000 PSI
- Flail Blades: 20 × 2 lbs.
- Cutter Shaft: 5″ DOM, 3/8″ wall with 3/8″ towers
- Cutter Shaft Speed: 1,800–2,000 RPM
- Skid Shoes: Replaceable AR500
- Hydraulic Hoses: 85″ with 1/2″ flat-face couplers
- Excavator Weight Class: 8,000–22,000 lbs.
- Drive: Direct drive
EXF-40 – 40″
- Cutting Width: 40″
- Weight: 557 lbs. plus mount
- Weight With Thumb Saddle: 626 lbs. plus mount
- Cutting Capacity: Up to 6″
- Hydraulic Flow: 20–44 GPM
- Hydraulic Pressure: 3,200 PSI
- Flail Blades: 20 × 2 lbs.
- Cutter Shaft: 6″ DOM, 3/8″ wall with 3/8″ towers
- Cutter Shaft Speed: 1,800–2,000 RPM
- Skid Shoes: Replaceable AR500
- Hydraulic Hoses: 85″ with 1/2″ flat-face couplers
- Drive: Direct drive
What’s the difference between the EXF-30 and EXF-40?
The biggest differences are cutting width, weight, and hydraulic requirements. The EXF-30 has a 30-inch cutting path, weighs 411 pounds plus the mount, and requires 13–25 GPM at 3,000 PSI. The EXF-40 increases the cutting path to 40 inches, weighs 557 pounds plus the mount, and requires 20–44 GPM at 3,200 PSI. Both are rated to cut material up to 6 inches.
Which size should I choose?
Start with your excavator’s auxiliary hydraulic flow and lifting capacity. The EXF-30 is the lighter, lower-flow option and is a better match for smaller machines. If your excavator can comfortably handle the additional 146 pounds and higher hydraulic requirement, the EXF-40 gives you another 10 inches of cutting width for covering more ground with each pass.
How large of material can these mowers cut?
Both models are rated for material up to 6 inches. With the EXF-30, Reaper describes 4-inch material as its normal production cutting capacity, with material up to 6 inches requiring slower, patient operation. Actual cutting performance depends on available hydraulic flow and pressure as well as the type and density of the material.
What does the optional thumb saddle do?
The thumb saddle gives your excavator’s existing thumb a reinforced surface to close against. With the saddle installed, the mower and machine thumb can work together to grab logs, rocks, limbs, and other debris. The thumb itself is part of your excavator; the saddle is the piece added to the mower that gives the thumb a purpose-built surface to clamp material against.
Does the mower come with an excavator thumb?
No. The thumb saddle is an available mower option, while the thumb itself is part of the excavator. Your machine needs an appropriate thumb to use the saddle for grabbing material.
Can the EXF-30 and EXF-40 mow overhead?
Yes. Both can be positioned with the excavator boom for overhead cutting, making them useful for trimming overhanging brush and vegetation along roads, trails, fence lines, and property edges.
What is the advantage of a flail mower for brush clearing?
Rather than simply knocking vegetation down, the rotating flail knives cut and mulch material as the mower passes through it. Flails are also useful in uneven, brushy terrain where the mower may encounter a mix of grass, shrubs, saplings, and woody growth.
Do these mowers require a case drain?
Reaper provides a case drain line when required by the hydraulic configuration. The mower should be set up according to the requirements of both the attachment and the carrier machine.
Common Compatible Machines
Caterpillar: 303.5 CR, 304, 305 CR, 306 CR, 307.5, 308 CR, 309 CR
John Deere: 35 P-Tier, 50 P-Tier, 60 P-Tier, 75 P-Tier, 85 P-Tier
Kubota: KX033-4, KX040-5, KX057-5, KX080-5, U35-4, U48-5, U55-5
Bobcat: E35, E37, E40, E42, E48, E50, E55, E60, E63, E88
Takeuchi: TB235-2, TB240, TB250-2, TB260, TB370, TB290
Yanmar: ViO35-7, ViO50-6A, ViO55-6A, ViO80-7, SV100-7
CASE: CX37C, CX50D, CX57C, CX60C, CX75C SR, CX80C
New Holland: E37C, E50D, E57C, E60C
Wacker Neuson: ET35, EZ36, ET42, EZ50, ET58, EZ80
SANY: SY35U, SY50U, SY60C, SY75C, SY80U
Komatsu: PC35MR-5, PC45MR-5, PC55MR-5, PC78US-11, PC88MR-11
Reaper Attachments equipment is covered by a 1-year structural limited warranty against manufacturing defects in materials and workmanship. Wear parts, including blades, skid shoes, hoses, hydraulic couplers, bearings, seals, and hydraulic components, are excluded from the standard warranty and may be covered on a case-by-case basis if defective upon arrival. If you run into a warranty issue, contact Echo Eqpt and our team will connect you with Reaper Attachments’ warranty department to get the process started.
Clear Hard-to-Reach Areas
Use the excavator’s reach to clear slopes, ditches, fence lines, roadsides, tree lines, and other areas that are difficult to reach with conventional mowing equipment.
Match the Mower to Your Machine
Choose the lighter, lower-flow 30-inch model or step up to the 40-inch model for greater cutting width when your excavator has the hydraulic capacity to support it.
Cut and Clean Up With One Attachment
Add the optional thumb saddle to use your excavator’s existing thumb to grab logs, limbs, rocks, and debris after cutting, reducing attachment changes during clearing work.
Cut and Mulch in One Pass
Heavy flail blades break down grass, brush, shrubs, and woody growth as you work, helping reduce the amount of loose vegetation left behind.
- Roadside brush clearing
- Ditch and bank mowing
- Fence-line clearing
- Forestry work
- Trail maintenance
- Overhead vegetation trimming
- Tree-line maintenance
- Land clearing
- Fields and overgrown property
- Slopes and uneven terrain
- Driveway and access-road maintenance
- Brush, shrub, and sapling removal

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.











