











Reaper Attachments | EXFM-30 Mini Excavator Flail Mower
Estimated shipping only — your final shipping cost is confirmed at checkout.
The Reaper EXFM-30 Excavator Flail Mower gives compact excavators a 30-inch cutting head for clearing brush, heavy grass, saplings, and overgrowth in places conventional mowing equipment can’t easily reach. Mounted on an excavator, the mower can work along slopes, ditch banks, fence lines, trails, and around trees while also reaching overhead vegetation and brush beyond the edge of the machine.
The EXFM-30 combines a direct-drive flail system with a compact, reinforced housing designed for excavators in the 3- to 8-ton range. Reaper also builds a thumb saddle into the mower, giving the excavator’s existing thumb a surface to clamp material against. That means the operator can use the mower and thumb together to grab and move logs, limbs, and other debris instead of changing attachments just to clean up after cutting.
Features
- 30-Inch Cutting Width: Compact cutting head works well for trails, ditch banks, slopes, wooded areas, and other places where reach and maneuverability matter.
- Excavator-Mounted Design: Uses the excavator boom to mow beside, below, or above the machine and reach vegetation that ground-level mowing equipment can’t.
- Optional Thumb Saddle: Add Reaper’s bolt-on thumb saddle to give your excavator’s existing thumb a reinforced surface to clamp material against. With the saddle installed, you can use the mower and machine thumb together to pick up and move logs, rocks, limbs, and other debris without changing attachments.
- Direct-Drive Flail System: Transfers hydraulic power directly to the cutter system without a belt-driven drivetrain.
- Heavy-Duty Flail Blades: Rotating flails cut and mulch grass, brush, and woody vegetation.
- Reinforced Housing: Heavy steel construction protects the cutter assembly during demanding vegetation-management work.
- Replaceable Wear Components: Designed with serviceable cutting and wear components for continued use in abrasive clearing conditions.
- American Made: Manufactured by Reaper Attachments in the USA.
- Model: EXFM-30
- Cutting Width: 30″
- Excavator Size: 3–5 tons
- Hydraulic Flow: 12–27 GPM
- Hydraulic Pressure: 3,000 PSI
- Drive: Direct drive
- Thumb Saddle: Integrated
- Mount: Configured for excavator
- Case Drain: Required
What size excavator is the EXFM-30 designed for?
The EXFM-30 is designed for excavators in approximately the 3- to 8-ton range. Hydraulic flow, pressure, attachment weight, and the machine’s lifting capacity should all be considered when matching the mower to an excavator.
What does the optional thumb saddle do?
The thumb saddle gives your excavator’s existing thumb a reinforced surface to close against. This lets you use the mower and thumb together to grab logs, rocks, limbs, and other debris and move them out of the cutting path without switching attachments. The thumb itself is part of your excavator; the optional saddle is the piece added to the mower that gives the thumb something designed to clamp against.
Does the EXFM-30 come with an excavator thumb?
No. The optional thumb saddle is added to the mower, while the thumb itself is part of the excavator. Your machine needs an appropriate thumb to use the mower and saddle for grabbing material.
What can the EXFM-30 cut?
The EXFM-30 is designed for mowing and mulching grass, brush, saplings, and woody vegetation. Its excavator-mounted design is especially useful for vegetation on slopes, ditch banks, trails, wooded areas, and other difficult terrain.
Can it cut overhead vegetation?
Yes. The excavator boom allows the cutting head to be positioned above ground level, making the EXFM-30 useful for reaching limbs and vegetation along tree lines and other elevated areas.
Why use a flail mower on an excavator?
The excavator boom gives the mower more positioning freedom than a conventional front-mounted mower. Operators can reach down slopes, across ditches, around obstacles, and into vegetation without positioning the entire machine directly over the area being cut.
Does the EXFM-30 require a case drain?
Yes. A properly connected case drain is required for the mower’s hydraulic system.
Can I use the EXFM-30 to move material after cutting?
Yes, when the mower is equipped with the optional thumb saddle and the excavator has a compatible thumb. The thumb can close against the saddle to grab logs, limbs, rocks, and other debris so they can be picked up and repositioned.
Bobcat: E35, E37, E40, E42, E48, E50, E55, E60, E63
Caterpillar: 303.5 CR, 304, 305 CR, 306 CR, 307.5
John Deere: 35 P-Tier, 50 P-Tier, 60 P-Tier, 75 P-Tier
Kubota: KX033-4, KX040-5, KX057-5, U35-4, U48-5, U55-5
Takeuchi: TB235-2, TB240, TB250-2, TB260, TB370
Yanmar: ViO35-7, ViO50-6A, ViO55-6A, ViO80-7
CASE: CX37C, CX50D, CX57C, CX60C
New Holland: E37C, E50D, E57C, E60C
Develon: DX35Z-7, DX42-7, DX50Z-7, DX55R-7, DX62R-7
Wacker Neuson: ET35, EZ36, ET42, EZ50, ET58, EZ80
SANY: SY35U, SY50U, SY60C, SY75C
Komatsu: PC35MR-5, PC45MR-5, PC55MR-5, PC78US-11
Reaper Attachments equipment is covered by a 1-year structural limited warranty against manufacturing defects in materials and workmanship. Wear parts, including blades, hoses, hydraulic couplers, bearings, seals, and hydraulic components, are excluded from the standard warranty and may be covered on a case-by-case basis if defective upon arrival. If you run into a warranty issue, contact Echo Eqpt and our team will connect you with Reaper Attachments’ warranty department to get the process started.
Clear Hard-to-Reach Areas
Use the excavator’s reach to mow brush along slopes, ditch banks, fence lines, tree lines, and other areas that are difficult to access with conventional mowing equipment.
Cut and Clean Up With the Same Attachment
Add the optional thumb saddle to use your excavator’s existing thumb to grab logs, limbs, rocks, and debris after cutting, reducing the need to switch attachments.
Work in Tight and Uneven Terrain
The compact 30-inch cutting head is well suited to wooded areas, trails, ditch banks, property edges, and other places where a larger mower can be cumbersome.
Mulch as You Clear
The flail cutting system cuts and breaks down grass, brush, and woody vegetation as you work, leaving less material behind to clean up.
- Ditch and bank mowing
- Trail maintenance
- Forestry work
- Brush clearing
- Fence-line maintenance
- Pond and drainage areas
- Slopes and uneven terrain
- Tree-line maintenance
- Overhead vegetation
- Roadside maintenance
- Property cleanup
- Moving cut logs and limbs with an excavator thumb

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.











