







Skid Steer Doors of North America | New Holland Alpha Series Polycarbonate Skid Steer Door
Estimated shipping only — your final shipping cost is confirmed at checkout.
The Skid Steer Doors of North America New Holland Alpha Series Polycarbonate Skid Steer Door is a complete retrofit door kit for New Holland Alpha Series skid steers and compact track loaders that never had a factory-mounted door. The 1/2″ Lexan polycarbonate door gives the operator a strong, shatter-resistant front door for protection from weather, brush, dust, and jobsite debris.
Because these machines did not start with a factory door, this kit includes the hardware needed to add one, including hinges with side-mount brackets, handles, latch, striker hardware, and weather seal. Side windows, an electric wiper kit, LED light bar, and cab heater are also available.
Features
- For Machines Without a Factory Door: Built specifically for New Holland Alpha Series machines that never had a factory-mounted door.
- 1/2″ Lexan Polycarbonate Door: Heavy-duty polycarbonate provides much better impact resistance than standard glass.
- Complete Retrofit Kit: Includes the hardware needed to add a door to an open-cab machine.
- Side-Mount Hinge Brackets: Includes male and female hinges with brackets for mounting the new door.
- Locking Exterior Handle: High-impact resin handle includes a tumbler lock and coded keys.
- Spring-Loaded Latch: Locking latch and release handle make the door easy to open and close.
- Interior Pull Handle: Stainless steel handle gives the operator a solid grip from inside the cab.
- Weather-Sealing Gasket: Includes a 1/2″ bulb-seal gasket around the door.
- Optional Side Windows: Add 1/8″ polycarbonate side window panels for a more enclosed cab.
- Optional Electric Wiper Kit: Add a 12-volt electric wiper and motor for rain, snow, and mud.
- Optional LED Light Bar: Add a 22″ LED light bar for extra work lighting.
- Optional Cab Heater: Add a 12-volt heater for cold-weather work.
- Door Material: 1/2″ Lexan polycarbonate
- Door Style: Frameless retrofit door
- Gasket: 1/2″ bulb-seal gasket
- Exterior Handle: High-impact resin handle with tumbler lock and coded keys
- Interior Handle: Stainless steel pull handle
- Latch: Locking latch with spring-loaded release handle
- Hinges: Male and female hinges with side-mount brackets
- Striker Hardware: Striker bolt and plate included
- Side Window Material: 1/8″ polycarbonate when selected
- Accessory Power: 12-volt for wiper, heater, and LED light bar
- Installation: Drilling and bolting required
What is the difference between the New Holland Alpha Series and Alpha Max doors?
The Alpha Series kit is for machines that never had a factory-mounted door. The Alpha Max kit is for machines that already had a factory door setup. Choosing the correct version matters because the mounting hardware is different.
Which New Holland machines can use this door?
This kit is intended for New Holland Alpha Series skid steers and compact track loaders with the open-cab setup and no original factory-mounted door. Common 200 and 300 Series machines are listed below.
Does the kit include the hardware needed to add a door?
Yes. The kit includes the door, gasket, exterior handle, interior pull handle, latch, striker hardware, hinges, and side-mount brackets.
Is drilling required?
Yes. Some drilling and bolting are required to install the retrofit kit.
Can I add side windows?
Yes. Optional 1/8″ polycarbonate side windows can be added to help close in the cab.
Can I add a windshield wiper?
Yes. This door supports the optional 12-volt electric wiper kit.
Can I add a heater and LED light bar?
Yes. A 12-volt cab heater and 22″ LED light bar are both available.
Note: This Alpha Series kit is for machines that never had a factory-mounted door. If your machine originally had a factory door, the Alpha Max kit is the version to check instead. Confirm your cab setup before ordering.
Common Compatible Machines
New Holland 200 Series Skid Steers: L213, L215, L216, L218, L220, L221, L223, L225, L228, L230, L234
New Holland 200 Series Compact Track Loaders: C227, C232, C234, C237, C238, C245
New Holland 300 Series Skid Steers: L313, L315, L316, L318, L320, L321, L325, L328, L330, L334
New Holland 300 Series Compact Track Loaders: C327, C330, C332, C334, C337, C338, C345
The Lexan polycarbonate door is covered by SSDNA’s limited lifetime warranty against qualifying breakage during normal use. The warranty applies to the original purchaser and provides one free replacement door if a qualifying failure occurs. It does not transfer to a new owner and does not cover misuse, abnormal operating conditions, scratches, or normal cosmetic wear.
Door hardware and optional equipment are covered for 3 months from purchase. This includes parts such as hinges, latches, handles, seals, side window panels, wiper components, heaters, and LED light bars.
Add a Door to an Open-Cab Machine
This kit is made specifically for New Holland Alpha Series machines that never had a factory door, giving you the hardware needed to add one instead of trying to piece together factory parts.
Better Protection Than Glass
The 1/2″ Lexan polycarbonate door is built to handle impacts that could crack or shatter standard glass.
Keep Weather and Debris Out
Adding a front door helps protect the operator from wind, snow, rain, dust, brush, and flying debris.
Build Out the Cab
Side windows, a wiper, heater, and LED light bar can be added depending on the conditions you work in.
- New Holland Alpha Series open-cab machines
- Machines that never had a factory-mounted door
- Forestry and brush work
- Brush cutting
- Construction
- Snow removal
- Winter work
- Dusty jobsites
- Cab enclosure upgrades
- Adding weather protection to an open cab

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.











