













Chains for Tracks | ASV Track Chains
Estimated shipping only — your final shipping cost is confirmed at checkout.
Chains for Tracks ASV Track Chains are designed specifically for ASV-style suspended undercarriages found on many ASV Posi-Track loaders, Terex track loaders, and select Caterpillar Multi Terrain Loaders. The ASV-specific mounting configuration provides added traction while allowing the brackets to clear the unique bogie-wheel and rubber-lug arrangement used by these undercarriages.
Each full set includes 14 chain assemblies, with seven installed on each track. The clamp-on system adds traction in snow, ice, mud, wet ground, and other slippery conditions without drilling into the rubber tracks or permanently modifying the machine.
Features
- ASV-Specific Design: Engineered specifically for undercarriages that use rubber track lugs outside of the bogie or roller wheels.
- 14-Chain Full Set: Each complete set includes 14 chain assemblies, with seven installed on each track.
- Grade 70 Steel Chain: Heavy-duty Grade 70 chain provides durable traction for demanding winter and low-traction conditions.
- Maintains Undercarriage Clearance: ASV-specific bracket positioning is designed to work around the suspended bogie-wheel system when proper clearance is available.
- Consistent Ground Contact: Seven chains per track keep multiple chains engaging the ground as the track rotates.
- Improved Sidehill Stability: Added traction can help reduce sideways sliding on snow, ice, mud, slopes, and uneven terrain.
- Fast Installation: A complete set can typically be installed in approximately 15–20 minutes.
- No Drilling Required: Clamp-style mounting attaches to compatible rubber tracks without permanent modification.
- Removable and Reusable: Chains can be removed when conditions improve and reinstalled when additional traction is needed.
- Three Track Sizes: Available for compatible 15–16.5 in., 17–18.5 in., and 19.5–20 in. rubber tracks.
- Made in the USA: Designed, manufactured, and assembled in the United States.
- Free Shipping: Full sets ship free within the United States.
Chains for Tracks® traction chains are protected by U.S. Patent No. 11,932,331 B2.
- Chain Style: ASV-specific round link
- Chain Grade: Grade 70
- Material: Hardened steel
- Full Set Quantity: 14 chains
- Chains Per Track: 7
- Available Track Sizes: 15–16.5 in. | 17–18.5 in. | 19.5–20 in.
- Recommended Outside Clearance: Approximately 2 in.
- Recommended Inside Clearance: Approximately 1.5 in.
- Installation Time: Approximately 15–20 minutes
- Installation Method: Clamp-on
- Drilling Required: No
- Included: 14 ASV-style track chain assemblies for one machine
- Country of Manufacture: USA
What makes these different from the standard Round Track Chains?
These chains use an ASV-specific mounting configuration designed around the suspended undercarriage found on ASV, Terex, and select Caterpillar machines. The bracket placement accounts for the rubber lugs and inward-positioned bogie wheels used by this undercarriage design.
How many chains are included in a full set?
A full set includes 14 chain assemblies, with seven installed on each rubber track.
How much clearance do I need?
Chains for Tracks recommends approximately 2 in. between the outside bogie or roller wheel and the outside edge of the rubber track, along with approximately 1.5 in. between the inside roller and inside edge of the track.
What if the rollers sit close to the edge of the track?
If the rollers or bogie wheels sit flush with or very close to the edge of the rubber track, these chains should not be installed. Insufficient clearance can cause the brackets to contact the rollers, undercarriage, or machine frame.
Will these fit Caterpillar machines?
Some Caterpillar Multi Terrain Loaders use an ASV-style suspended undercarriage and may use this chain configuration. Other CAT loaders use a different undercarriage and require the standard chain setup. Confirm the actual undercarriage and clearances before ordering.
Do these fit Terex track loaders?
Many Terex Posi-Track machines use the same general ASV-style undercarriage design and may be compatible. Track width and actual undercarriage clearance still need to be checked before ordering.
How long does installation take?
A complete set can typically be installed in approximately 15–20 minutes after the correct spacing and clearances have been confirmed.
Do I need to drill into my tracks?
No. The chains attach with clamp-style hardware and do not require drilling or permanent modification.
Can these chains be used on pavement?
They can be driven on pavement, but hard surfaces increase chain wear and may mark or damage the pavement. The chains are primarily intended for winter traction and other slippery operating conditions.
Note: These chains require an ASV-style suspended undercarriage with adequate inside and outside clearance. Machine model alone does not guarantee fitment. Confirm actual track width, undercarriage configuration, and clearance before ordering.
15–16.5″ Full Set
ASV: RC50, RC60, PT50, PT60, PT70, RT50, RT60, RT65
Terex: PT50, PT60, PT70
Caterpillar: 247, 247B, 247B2, 247B3, 257, 257B, 257B2, 257B3, 257D, 257D3
17–18.5″ Full Set
ASV: RC85, RC100, PT70, PT80, PT100, SR80, RT75, RT110, RT120, RT135
Terex: PT70, PT75, PT80, PT100, PT100G, PT110, R265T
Caterpillar: 267, 267B, 277, 277B, 277C, 277C2, 277D, 287, 287B, 287C, 287C2, 287D, 297C, 297D, 297D XHP, 297D2, 297D2 XHP
19.5–20″ Full Set
ASV: SR80, RT75, RT120, RT120 Forestry, RT135 Forestry
Terex: PT80, PT100, PT100G, PT110
Chains for Tracks backs its traction systems with a 1-year limited manufacturer warranty from the original date of purchase for the original purchaser. Coverage applies to defects in materials and workmanship under normal intended use.
Normal wear, improper installation or maintenance, misuse, incompatible equipment, modifications, corrosion, and use outside the product’s intended winter-traction applications are excluded.
Add traction without fighting the ASV undercarriage design.
The ASV-specific configuration is built around the suspended bogie-wheel system rather than trying to force a standard track-chain bracket into a space where it may contact the rollers.
Improve control in snow, ice, mud, and loose terrain.
Fourteen chain assemblies add repeated steel contact across both tracks to help reduce spinning and sideways movement when rubber alone struggles for grip.
Keep the machine unmodified.
The clamp-on mounting system provides seasonal traction without drilling into the rubber tracks or making permanent changes to the undercarriage.
Use the same system across multiple ASV-style machine families.
The design can work with compatible ASV Posi-Track loaders, Terex loaders, and select Caterpillar Multi Terrain Loaders when the required track width and undercarriage clearance are present.
- ASV Posi-Track loaders
- Terex Posi-Track loaders
- Select Caterpillar Multi Terrain Loaders
- Snow removal
- Winter construction
- Icy job sites
- Muddy terrain
- Slopes and uneven ground
- Landscaping
- Agriculture
- Property maintenance

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.












