













Chains for Tracks | Square Link Track Chains
Estimated shipping only — your final shipping cost is confirmed at checkout.
Chains for Tracks Square Link Track Chains are designed to add aggressive traction to rubber-track loaders, and other compatible tracked equipment working in snow, ice, mud, and other slippery conditions. The square-link design provides additional bite across the track surface to help reduce slipping and improve control without permanently modifying the machine, or rubber tracks.
Each full set includes 14 individual chain assemblies, with seven installed on each track. Chains can be installed or removed as conditions change, making them a practical seasonal traction option for compact track loaders and other compatible rubber-tracked machines.
Features
- Square-Link Traction Design: Square steel links provide an aggressive contact surface designed to bite into snow, ice, mud, and hard-packed terrain.
- 14-Chain Full Set: Each complete set includes 14 chains, with seven installed on each side of the machine.
- Consistent Ground Contact: Seven chains per track are designed to keep multiple chains contacting the ground as the track rotates for consistent traction and stability.
- Hardened High-Strength Steel: Built from hardened steel for demanding winter and off-road operating conditions.
- Fast Installation: A complete set can typically be installed in approximately 15–20 minutes.
- No Drilling Required: Chains clamp onto compatible rubber tracks without drilling holes or making permanent modifications to the track or machine.
- Removable Design: Chains can be removed and reinstalled when operating conditions change.
- Improved Sidehill Stability: Additional track bite can help reduce sideways sliding on snowy, icy, muddy, or uneven terrain.
- Made in the USA: Manufactured and assembled in the United States.
- Free Shipping: Full sets ship free within the United States.
Chains for Tracks® traction chains are protected by U.S. Patent No. 11,932,331 B2.
- Chain Style: Square link
- Material: Hardened high-strength steel
- Full Set Quantity: 14 chains
- Chains Per Track: 7
- Available Track Widths: 15–16.5 in. (400 mm) | 17–18.5 in. (450 mm)
- Installation Time: Approximately 15–20 minutes
- Installation Method: Clamp-on
- Drilling Required: No
- C-Clamp Sidewall Thickness: 1/4 in.
- C-Clamp Underside Length: Approximately 2-1/4–2-1/2 in.
- C-Clamp Upper Length: Approximately 2 in.
- Included: 14 square-link track chain assemblies for one machine
- Country of Manufacture: USA
How many chains are included in a full set?
A full set includes 14 individual chain assemblies, with seven chains installed on each rubber track.
Why choose Square Link over Round Link?
Square Link Chains are the more aggressive option for customers who need maximum traction on ice, packed snow, frozen surfaces, steep grades, and other demanding conditions. The square profile creates more biting edges against the ground for increased grip and resistance to sideways sliding. For machines with H-Pattern, Wavy H, or Vortex-style tracks, choose Round Link Chains instead.
How long does installation take?
A complete set can typically be installed in approximately 15–20 minutes once the proper spacing and clearance have been confirmed.
Do I need to drill into my tracks or machine?
No. The chains use clamp-style mounting hardware and do not require drilling or permanent modification of the rubber tracks or machine.
Will these fit every rubber track pattern?
No. Track width, tread pattern, and undercarriage clearance all need to be checked before ordering. Square-link chains are not recommended for Multi-Bar tracks. Machines with Multi-Bar tracks should use the manufacturer’s Multi-Bar-specific chains.
Can I use the Square Link Chains on Kubota tracks?
Possibly, depending on the track. Square-link chains are not recommended for Kubota H-Pattern, Wavy-H, or Vortex-style rubber tracks because the raised tread design can prevent the square chains from seating properly. The manufacturer recommends Round Link Chains for those tread patterns.
Do ASV or Terex machines use these standard chains?
Machines with ASV-style undercarriages generally require the manufacturer’s ASV-specific chain configuration rather than the standard Square Link set.
Can I run these on bare pavement?
These chains are intended for traction in winter and other slippery conditions. Extended use on bare pavement can accelerate wear and falls outside the manufacturer’s intended winter-traction use.
Note: Machine model alone does not guarantee fitment. Confirm actual rubber-track width, tread pattern, and undercarriage clearance before ordering. Square Link Chains are not recommended for Multi-Bar tracks, or Kubota H-Pattern, Wavy-H, or Vortex tracks. ASV-style undercarriages may require the ASV-specific chain system.
15–16.5″ (400 mm)
Bobcat: T76, T300, T320, T750
Caterpillar: 247, 247B, 247B2, 247B3, 257, 257B, 257B2, 257B3, 257D, 279C2, 279D, 289D, 289D3
CASE: 440CT, 445CT
John Deere: 329D, 329E, 333E, CT332
Komatsu: CK20
17–18.5″ (450 mm)
Bobcat: T250, T740, T770, T870
Caterpillar: 267, 267B, 277, 277B, 277C, 277C2, 279C, 287, 287B, 287C, 287C2, 287D, 289C, 289C2, 297C, 297D, 297D XHP, 299C, 299D, 299D XHP, 299D2, 299D2 XHP, 299D3
CASE: TR320, TR340, TR370, TR380, TV450B
Gehl: CTL70, CTL75, CTL80, CTL85, RT210, RT215, RT250, VT320
JCB: 1110T, 260T, 320T, 320T ECO, 3TS-8T
John Deere: 331G, 333G
Komatsu: CK35, CK35-1
Kubota: SVL90, SVL90-2, SVL95, SVL95-2, SVL95-2S, SVL97, SVL97-2, SVL97-2C
Mustang: MTL20, MTL25
Volvo: MCT135C, MCT145C
Wacker Neuson: ST35, ST45
Chains for Tracks backs its track-chain systems with a 1-year limited manufacturer warranty from the original date of purchase for the original purchaser. Coverage applies to defects in materials and workmanship under normal intended use.
Normal wear, improper installation or maintenance, misuse, incompatible equipment, modifications, corrosion, and use outside the product’s intended traction applications are excluded.
Get more traction from a rubber-track machine in winter conditions.
Square links create additional bite across the track surface to help a compact track loader keep moving when snow, ice, mud, or packed surfaces reduce the traction available from rubber alone.
Improve machine control without permanently altering the tracks.
The clamp-on design gives operators a removable traction solution without drilling into the rubber tracks or modifying the machine.
Install traction when you need it and remove it when you don’t.
A complete set can be installed relatively quickly and removed again as weather and job-site conditions change.
Maintain consistent grip across both tracks.
With seven chains installed on each side, multiple chains remain in contact with the ground as the tracks rotate, helping provide steadier traction and control.
- Snow removal
- Winter construction
- Icy job sites
- Muddy terrain
- Farm and property maintenance
- Landscaping
- Sloped or uneven ground
- Compact track loaders
- Compatible rubber-tracked equipment

Why buy from ECHO Eqpt?
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.












