Estimated shipping only — your final shipping cost is confirmed at checkout.
The Skeer Systems 6-Way Skid Steer Grader is built for rough grading, finish grading, pad preparation, driveway work, and other jobs where maintaining a flat, consistent surface matters. Its patented traction-level adjustment and flat Hardox 450 cutting edge help the blade follow the machine’s ground plane, while full 6-way hydraulic movement gives the operator control over grade, slope, and material placement.
Choose the PRO for a fixed-width grader with a simpler, lighter setup, or the ProPlus for higher-volume grading with 30″ hydraulic wings on each side. The PRO is available in 7′ and 8.4′ widths, while the ProPlus expands from 7′ to 12′ or from 8.4′ to 13.4′ for wider passes without giving up a narrower working width when space gets tight.
What is the difference between the Skeer PRO and ProPlus?
The PRO uses a fixed-width blade and is the lighter, simpler option for everyday rough and finish grading. The ProPlus adds a 30″ hydraulic wing to each side, allowing the operator to widen the blade for larger passes and retract it again when working in tighter areas.
What widths are available?
The PRO is available in 7′ and 8.4′ fixed widths. The ProPlus is available in a 7′ model that expands to 12′ and an 8.4′ model that expands to 13.4′.
What does 6-way grading mean?
The 6-way hydraulic design gives the operator control over the blade position for cutting, leveling, angling, and sloping material instead of relying on a fixed straight blade.
What are the ProPlus hydraulic wings used for?
The wings extend the working width by up to 30″ on each side. This lets the operator cover larger pads and open areas more quickly while retaining the ability to retract the grader for narrower work.
Can the grader be used in reverse?
Yes. The flat cutting-edge design allows the grader to work while moving forward or backdragging in reverse.
What is traction-level adjustment?
The system allows the cutting edge to be positioned relative to the skid steer’s ground-contact plane, helping the blade maintain a consistent grading position as the machine moves.
What is the cutting edge made from?
The graders use replaceable Hardox 450 cutting edges designed for abrasion resistance and repeated contact with soil, gravel, and aggregate.
Does this require machine control?
No. These PRO and ProPlus models use manual hydraulic controls. They can also be used with a laser indicator, but they are separate from Skeer’s MCR models designed for full laser, 2D, or 3D machine-control systems.
How much hydraulic flow is required?
The PRO is designed around approximately 15–20 GPM. The heavier ProPlus requires approximately 18–25 GPM.
Which ProPlus size should I choose?
The 7’–12′ ProPlus has a 60 HP minimum and is the better fit for many midsize machines. The 8.4’–13.4′ ProPlus requires approximately 90 HP and is intended for larger skid steers and compact track loaders capable of handling its greater weight and working width.
Note: Compatibility depends on the specific grader configuration. The 7′ PRO has a 50 HP minimum, the 8.4′ PRO and 7’–12′ ProPlus require at least 60 HP, and the 8.4’–13.4′ ProPlus requires approximately 90 HP. Verify horsepower, auxiliary hydraulic flow, operating capacity, and quick-attach configuration before ordering.
Common Compatible Machines
Bobcat: S510, S530, S550, S570, S590, S62, S64, S64-2, S66, S66-2, S76, S76-2, S86, S86-2, T550, T590, T595, T62, T64, T64-2, T66, T66-2, T76, T76-2, T86, T86-2, T650, T740, T770
Caterpillar: 232D3, 236D3, 242D3, 246D3, 262D3, 272D3, 249D3, 259D3, 279D3, 289D3, 299D3, 250, 255, 260, 265, 270, 275, 285
John Deere: 318G, 320G, 324G, 330G, 332G, 317G, 325G, 331G, 333G
Kubota: SSV65, SSV75, SVL65-2, SVL65-2s, SVL75-3, SVL97-2, SVL97-3, SVL110-3
CASE: SR175B, SR210B, SR240B, SR270B, SV185B, SV280B, SV340B, TR270B, TR310B, TR340B, TV370B, TV450B, TV620B
New Holland: L318, L320, L321, L328, L334, C327, C330, C332, C334, C337, C345, C362
JCB: 215, 225, 270, 300, 215T, 250T, 270T, 300T, 400T, 3TS-8T, 3TS-8W, 4TS-8T
Takeuchi: TL8R-2, TL10V-2, TL11R3, TL12R-2, TL12V-2
ASV: RT-65-1C Max, VT-75-1C Max, VT-80-1C Max, VT-100, RT-135, RS-75 Max, VS-75 Max
Wacker Neuson: ST31, ST37, ST45, ST50
Skeer Systems provides a one-year parts and labor warranty, subject to its warranty terms and exclusions.
Maintain a More Consistent Grade
The flat cutting edge and traction-level adjustment help the blade stay predictable against the ground, making it easier to cut high spots and finish low areas without constantly correcting the loader arms.
Shape Slopes and Drainage
The 6-way hydraulic design combines blade angle and tilt so the operator can create crowns, slopes, drainage paths, and transitions instead of being limited to flat straight-line grading.
Grade in Either Direction
The blade works while pushing forward or backdragging in reverse, making it easier to refine a surface without continually turning the machine around.
Cover More Ground With ProPlus
The ProPlus hydraulic wings extend the blade by five feet overall, giving contractors a much wider pass on pads, lots, and open grading areas while still retracting for tighter work.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
