Estimated shipping only — your final shipping cost is confirmed at checkout.
The Digga A4 Earth Auger Bit is built for everyday drilling jobs like fence posts, landscaping, planting, footings, and general property work. It’s available in sizes from 6″ to 36″ and works with compatible auger drives on mini skid steers, skid steers, and compact excavators.
Choose the Light-Condition Earth option for normal dirt and clay. Choose Heavy-Condition Earth if you regularly work in harder, more abrasive soil. Both versions use replaceable teeth and a replaceable pilot, so the parts that take the most wear can be changed without replacing the entire auger bit.
What is the difference between Light-Condition Earth and Heavy-Condition Earth?
Light-Condition Earth is intended for general soil and clay. Heavy-Condition Earth uses more wear-resistant tungsten-faced cutting components for harder, more abrasive ground and softer fracturable material.
How much auger-drive torque do I need?
For normal earth, a drive around 1,450 ft-lb can handle A4 bits through 24″. A 30″ bit calls for roughly 2,250 ft-lb or more, while a 36″ bit should be paired with a drive around 3,550 ft-lb or higher. Hard clay and shale require more torque, so Digga limits a roughly 1,450 ft-lb drive to 12″ and a roughly 2,250 ft-lb drive to 24″ in those conditions.
What hydraulic flow and pressure do I need?
Digga drives commonly paired with these bits range from about 6–30 GPM, with maximum pressure ratings generally between 3,000 and 3,500 PSI depending on the drive. Your machine needs to fall within the operating range of your specific auger drive.
Which option should I choose for ordinary dirt?
Choose Light-Condition Earth for most routine drilling in soil and clay. Heavy-Condition Earth is the better choice when you regularly encounter harder or more abrasive ground.
Is the A4 designed for rock drilling?
The A4 is primarily an earth auger. The Heavy-Condition Earth configuration can handle tougher ground and softer fracturable material, but mixed rock and earth applications are better suited to the Digga RC4. Dedicated rock drilling calls for a rock auger such as the DR6.
Are the teeth and pilot included?
Yes. The appropriate cutting teeth, pilot, retaining components, and clips are included with the selected auger.
Can the cutting teeth be replaced?
Yes. The A4 uses replaceable wear components, allowing the cutting teeth and pilot to be serviced individually as they wear.
What auger drive does the A4 use?
Digga recommends the A4 for compatible 1MDS through 4DSS auger drives with a 2″ hex output. Drive selection depends on the host machine, hydraulic output, ground conditions, and selected auger diameter.
Can I use an extension with the A4?
Yes. The A4 is compatible with Digga XO20 2″ hex outer auger extensions.
What size A4 should I use?
Choose the diameter based on the hole required for your project and make sure the selected size falls within the drilling capacity of your auger drive and host machine.
Note: The A4 Earth Auger Bit requires a compatible auger drive, and machine-specific mount. Exact compatibility depends on machine hydraulics, drive selection, ground conditions, and auger diameter. Digga rates the A4 for machines approximately 0.75–4.5 tons.
Common Compatible Machines
Bobcat Mini Track Loaders: MT100, MT120
Bobcat Skid Steer Loaders: S70, S450, S590, S64-2, S66-2, S650, S76-2, S770, S86-2
Caterpillar Skid Steer Loaders: 226D3, 232D3, 236D3, 242D3, 246D3, 262D3
Ditch Witch Stand-On Skid Steers: SK800, SK900, SK1000, SK1050, SK1750, SK3000
New Holland Skid Steer Loaders: L316, L318, L320, L321, L328
Vermeer Mini Loaders: CTX50, S450TX, S925TX, CTX100, CTX160, ML80, ML100, ML130, ML150
Wacker Neuson Utility Track Loaders: SM60, SM100, SM120
John Deere Compact Excavators: 17 P-Tier, 26 P-Tier, 30 P-Tier, 35 P-Tier, 40 P-Tier
Kubota Compact Excavators: K008-5, U10-5, U17-5, KX018-4, U27-4, KX030-4, KX033-4, U35-4, KX040-5
Takeuchi Compact Excavators: TB210R, TB216, TB20e, TB225, TB230, TB235-2, TB240
Wacker Neuson Compact Excavators: 803, EZ17, EZ26, EZ36, ET40
Digga augers are covered by a 1-year manufacturer warranty against defects in materials or workmanship.
Warranty coverage is subject to Digga approval and proper use and maintenance according to the operator’s manual
Match the cutting setup to your ground.
Light-Condition Earth gives you a practical setup for everyday soil and clay drilling, while Heavy-Condition Earth adds more wear-resistant cutting components for tougher ground.
Drill clean, accurately sized holes.
Digga’s True Cut geometry is designed so the cutting head produces a hole that closely matches the selected auger diameter rather than unnecessarily widening it.
Carry spoil back out of the hole.
The shallow flight pitch and double-start, single-carry design help retain excavated material as the auger is withdrawn.
Replace wear parts instead of the complete bit.
Cutting teeth and pilot components can be serviced individually as they wear, helping extend the useful life of the auger.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
