Estimated shipping only — your final shipping cost is confirmed at checkout.
The Maxx Attachments Conveyor Cleaning Bucket is built for cleaning spilled material from underneath conveyor systems where a standard bucket does not have enough reach. Its long, low-profile floor helps skid steers and compact wheel loaders reach farther under conveyors to recover aggregate, dirt, rock, and other bulk material with less hand cleanup.
Formerly part of the Dymax attachment line, the bucket is available in multiple widths and floor lengths to fit different conveyor setups and carrier sizes. A replaceable bolt-on cutting edge protects the front of the bucket in abrasive material and makes the wear surface easy to service when needed.
What is a conveyor cleaning bucket used for?
It is designed to scoop spilled aggregate, dirt, rock, and other material from underneath conveyor systems where the extra reach of a long-floor bucket makes cleanup easier.
How do I choose the right width and floor length?
Start with the clearance available beneath and around the conveyor. Floor length determines how far the bucket can reach underneath the system, while bucket width affects how much material can be collected in each pass and how easily the machine can work in the available space.
What widths are available?
Available widths range from 30 to 72 inches. Not every floor length is available with every width.
How long can the bucket floor be?
Available floor lengths range from 48 to 96 inches, depending on bucket width.
Does the bucket include a cutting edge?
Yes. Maxx equips every Conveyor Cleaning Bucket with a replaceable bolt-on cutting edge.
How much does the bucket weigh?
Depending on width and floor length, attachment weight ranges from approximately 870 to 1,580 lb.
Will it fit a compact wheel loader?
Yes. Maxx offers these buckets for both skid steers and compact wheel loaders. The correct coupler and bucket configuration should be confirmed for the exact carrier before ordering.
Does this bucket require auxiliary hydraulics?
No. The Conveyor Cleaning Bucket itself does not require an auxiliary hydraulic circuit.
Is this the same conveyor bucket people may know from Dymax?
Yes. The former Dymax attachment line is now sold and supported as Maxx Attachments.
Note: Because bucket weight, width, and overall reach change considerably between configurations, compatibility should be checked against the exact bucket being ordered. The carrier needs the correct coupler and enough lift capacity and stability for both the attachment and the material being handled.
Common Compatible Machines
Bobcat: S510, S530, S550, S570, S590, S64, S66, S70, S76, S86, T550, T590, T595, T64, T66, T76, T86, L23, L28
Caterpillar: 226D3, 232D3, 236D3, 242D3, 246D3, 250, 255, 260, 265, 272D3, 289D3, 299D3, 903, 906, 907, 908
John Deere: 318G, 320G, 324G, 325G, 330G, 331G, 332G, 333G, 304 G-Tier, 304 P-Tier, 324 G-Tier, 324 P-Tier
Kubota: SSV65, SSV75, SVL65-2, SVL75-3, SVL97-2, SVL97-3, R540, R640
CASE: SR175B, SR210B, SR240B, SV185B, SV280B, SV340B, TR270B, TR310B, TV370B, TV450B, TV620B, 21F, 121F, 221F
New Holland: L318, L320, L321, L328, L334, C327, C332, C337, C345, C362, W50C, W60C, W70C, W80C
JCB: 190, 215, 225, 270, 300, 2TS-7T, 3TS-8T
Takeuchi: TL6R, TL8R2, TL10V2, TL12R2, TL12V2
ASV: RT-50, RT-60, RT-65, RT-75, RT-135, VT-100
Wacker Neuson: SW17, SW20, SW21, SW28, SW32, ST27, ST31, ST35, ST45, ST50, WL34, WL38, WL52, WL60
The Maxx Attachments Conveyor Cleaning Bucket is covered by Maxx’s limited manufacturer warranty. Structural components are covered for 12 months against defects in materials and workmanship under normal use. Normal wear to the cutting edge and other wear surfaces is not covered as a manufacturing defect.
Reach Under Conveyors More Easily
The extended floor gets farther underneath conveyor systems than a conventional bucket, making spilled material easier to recover.
Reduce Manual Cleanup
Using the carrier to reach material under the conveyor can cut down on shoveling and other labor-intensive cleanup.
Match the Bucket to the Site
A wide range of floor lengths and bucket widths makes it easier to choose a configuration for the available clearance and working space.
Keep the Wear Surface Serviceable
The bolt-on cutting edge can be replaced when worn instead of treating the entire bucket lip as a disposable surface.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
