Estimated shipping only — your final shipping cost is confirmed at checkout.
The Wallenstein BXH42 skid steer wood chipper turns your skid steer or compact track loader into a mobile chipping setup for property cleanup, landscaping, trail work, and tree maintenance. Its hydraulically driven disc chipper handles branches up to 4″ in diameter, while the wide gravity-feed hopper keeps operation straightforward without a separate feed system.
A 25″ rotor, reversible knives, and 4″ × 10″ in-feed opening handle brush and branches efficiently, while the 360° discharge chute and adjustable deflector let you direct chips where you want them. Hydraulic hoses and couplers are included, and the BXH42 mounts to a universal skid steer mounting plate.
What size branches can the Wallenstein BXH42 chip?
The BXH42 is rated for branches up to 4″ in diameter.
What hydraulic flow does the BXH42 require?
Wallenstein recommends 25 GPM of auxiliary hydraulic flow. Confirm your machine’s actual auxiliary flow before ordering.
Does the BXH42 have hydraulic feed rollers?
No. The BXH42 uses a gravity-feed system that allows branches to slide into the chipper rotor.
Are hydraulic hoses included?
Yes. Hydraulic hoses and couplers are included.
What type of skid steer mount does it use?
The BXH42 uses a universal skid steer mounting plate.
Can I rotate the discharge chute?
Yes. The discharge chute rotates 360°, and the end deflector can be adjusted to control where chips are directed.
How many chipper knives does it use?
The rotor uses two reversible chipper knives.
Can I use the BXH42 on a compact track loader?
Yes, provided the machine has the correct universal mounting interface and can supply the recommended auxiliary hydraulic flow.
Does the chipper require high-flow hydraulics?
Not necessarily. Wallenstein specifies a recommended flow of 25 GPM, so compatibility depends on the actual auxiliary flow of your machine rather than whether the manufacturer labels the system standard flow or high flow.
Note: The BXH42 uses a universal skid steer mounting plate and is designed around approximately 25 GPM auxiliary hydraulic flow. Actual compatibility can vary by model year and hydraulic configuration. Verify auxiliary flow, pressure, couplers, and machine capacity before ordering.
Common Compatible Machines
Bobcat: S650, S740, S770, T650, T740, T770
Caterpillar: 262D3, 272D3, 289D3, 299D3
John Deere: 331G, 332G, 333G
Wallenstein covers the BXH42 under its limited warranty for 5 years for consumer use and 2 years for commercial or rental use, subject to the manufacturer’s warranty terms and exclusions.
Turn Your Skid Steer Into a Chipping Setup
The BXH42 runs from the carrier’s auxiliary hydraulics, so there is no separate engine to fuel or maintain.
Simple Gravity-Feed Operation
The large hopper and angled infeed let branches move naturally toward the rotor without the complexity of powered feed rollers.
Direct Chips Where You Need Them
The 360° discharge chute and adjustable deflector make it easier to build piles, fill trailers, or spread chips around the work area.
Built for Routine Property and Landscape Work
A 4″ capacity makes the BXH42 a practical fit for fence lines, brush cleanup, tree maintenance, landscaping, trails, and rural property projects.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
