Estimated shipping only — your final shipping cost is confirmed at checkout.
Upgrade your Bobcat D Series cab from glass to a formed 1/2″ SHIELDS polycarbonate windshield designed around the shape and mounting points of Bobcat part #6732351. It gives you a durable polycarbonate alternative while allowing you to keep the existing cab door and supported factory-style mounting hardware.
Available in clear or 50% tint, the windshield features SHIELDS SUPERCOAT™ on both sides for improved abrasion resistance, UV protection, and continued windshield-wiper use. Its formed profile and machined mounting areas are designed to maintain the fit and function of the original windshield without requiring an entirely new door setup.
What Bobcat windshield does this replace?
This windshield is designed around Bobcat cab door window part #6732351. Because Bobcat windshield configurations can vary by serial number, verify the part number and existing door setup before ordering.
Can I use this to upgrade from glass to polycarbonate?
Yes. This windshield provides a formed 1/2″ polycarbonate alternative to the supported original glass configuration while retaining the existing cab door.
Can it replace an existing polycarbonate windshield?
SHIELDS lists original glass, OEM polycarbonate, and existing SHIELDS polycarbonate among the configurations this product may replace. Always verify the current windshield and mounting setup before ordering.
What thicknesses are available?
This Bobcat D Series windshield is offered in 1/2″ polycarbonate.
Is tint available?
Yes. The 1/2″ windshield is available in clear or tinted polycarbonate.
How dark is the tint?
SHIELDS specifies the tinted material at 50% light transmission.
Is the tint an applied film?
No. The polycarbonate material itself is tinted rather than using an applied window film.
Can I continue using the windshield wiper?
Yes. SUPERCOAT™ is applied to both sides of the polycarbonate and is designed to provide the abrasion resistance needed for normal windshield-wiper use.
Will I need new mounting hardware?
No additional mounting hardware is normally required for the supported configuration. The windshield is machined to work with the existing mounting system.
Is the windshield curved?
Yes. It is formed to follow the curved profile of the original Bobcat windshield.
Will this fit every machine listed below?
Not necessarily. Bobcat windshield configurations can vary by serial number and equipment configuration, so the existing part number and mounting setup should always be verified before ordering.
Is this windshield ballistic-rated or certified for operator protection?
No. SHIELDS does not assign a ballistic rating to this windshield or warrant it as meeting a particular safety-code or bodily-protection requirement.
Note: This windshield is designed around Bobcat part #6732351. Compatibility should be verified by OEM part number, machine serial number, and existing door configuration before ordering. A model appearing below does not guarantee compatibility with every serial number or configuration.
Common Compatible Machines
Bobcat All-Wheel Steer Loaders: A220, A300
Bobcat Skid Steer Loaders: 751, 753, 763, 773, 863, 873, 883, 963, S100, S130, S150, S160, S175, S185, S205, S220, S250, S300, S330
Bobcat Compact Track Loaders: T110, T140, T180, T190, T200, T250, T300, T320
SHIELDS provides a limited manufacturer warranty covering qualifying manufacturing defects. Defective products must be reported and returned according to SHIELDS’ warranty requirements and before installation or use.
SHIELDS does not warrant its polycarbonate products for a particular end-use application, safety-code requirement, or ballistic protection. Inspect the windshield and confirm fitment before installation. If you have a warranty question or claim, contact us and we’ll help connect you with SHIELDS and get the process started.
Upgrade from glass to 1/2″ polycarbonate.
Replace the supported original windshield with formed polycarbonate designed around the same Bobcat cab profile and mounting locations.
Keep the existing cab door.
The windshield is machined around the supported original mounting setup so you can upgrade the window without replacing the complete door.
Keep using the windshield wiper.
SUPERCOAT™ helps protect the polycarbonate from abrasion during normal cleaning and windshield-wiper use while also helping resist UV-related hazing.
Choose clear or tinted material.
Select a clear windshield or 50% light-transmission tint depending on your preferred cab visibility and light level.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
