Estimated shipping only — your final shipping cost is confirmed at checkout.
The Skeer Systems Adjustable Skid Steer Grading Bucket combines the material-handling ability of a traditional bucket with a design built specifically for smoother, more consistent grading. Its patented traction-level adjustment lets the cutting edge be set to the skid steer’s ground-contact plane when the lift arms are lowered, reducing the amount of constant height correction needed while grading.
A flat, replaceable steel cutting edge works in both forward and reverse for cutting, leveling, and back-dragging. The adjustable quick-attach helps dial in the bucket position for the machine, while replaceable corner wear plates and bottom protection are designed for repeated ground contact. Four widths are available from 72″ to 84″.
What makes the Skeer Adjustable Bucket different from a standard skid steer bucket?
The main difference is the patented traction-level adjustment. It allows the bucket’s cutting edge to be set relative to the skid steer’s ground-contact plane, helping the operator maintain a more consistent grading position without constantly correcting lift-arm height.
Is this still a functional material bucket?
Yes. It retains the basic material-handling function of a skid steer bucket while adding features specifically intended to improve grading and leveling work.
Can the bucket grade while moving backward?
Yes. The flat cutting edge is designed to work in both forward and reverse, making the bucket useful for backdragging and finish grading.
Why does the bucket use a flat cutting edge?
The flat edge helps reduce unintended digging and gouging when the goal is to level or finish a surface rather than aggressively penetrate the ground.
What is the cutting edge made from?
The replaceable cutting edge is made from Hardox 450 wear-resistant steel.
Is the cutting edge replaceable?
Yes. The cutting edge is bolt-on and replaceable, along with the two corner wear plates.
What does the adjustable quick attach do?
It allows the mounting position of the bucket to be adjusted so the cutting edge can be properly aligned with the skid steer and the traction-level system.
What widths are available?
The bucket is available in 72″, 78″, 80″, and 84″ widths.
What size skid steer is required?
The minimum published requirement is 40 HP. Machine width, rated operating capacity, and the weight of the selected bucket should also be considered when choosing a size.
What types of work is this bucket best suited for?
It is well suited to finish grading, site preparation, driveway work, landscaping, gravel and aggregate work, pad preparation, backdragging, and other jobs where both material handling and a smooth finished surface are needed.
Note: The Adjustable Grading Bucket is intended for skid steer loaders with a compatible quick-attach interface and a minimum of 40 HP. Match the bucket width and weight to the skid steer’s operating capacity, machine width, and application before ordering.
Common Compatible Machines
Bobcat: S450, S510, S530, S550, S570, S590, S62, S64, S64-2, S66, S66-2, S650, S76, S76-2, S770, S86, S86-2
Caterpillar: 226D3, 232D3, 236D3, 242D3, 246D3, 262D3, 250, 260, 270, 270 XE
John Deere: 316GR, 318G, 320G, 324G, 330G, 332G
Kubota: SSV65, SSV75
CASE: SR160B, SR175B, SV185B, SR210B, SR240B, SR270B, SV280B, SV340B
New Holland: L316, L318, L320, L328, L334
JCB: 215, 250, 270, 290, 300
Gehl: R135 GEN:2, R165, R190 GEN:2, R220, R260
Skeer Systems provides a one-year parts and labor warranty, subject to its warranty terms and exclusions.
More Consistent Grading
The traction-level adjustment helps establish a repeatable cutting position when the bucket is lowered, reducing the amount of lift-arm correction needed to maintain an even grade.
Grade in Either Direction
The flat cutting edge works while pushing forward or backdragging in reverse, making it easier to shape and finish an area without constantly repositioning the machine.
Move Material and Finish the Surface
Unlike a dedicated grading blade, the bucket can still carry and place dirt, gravel, or other material before transitioning into grading and finish work.
Replace the Wear Parts, Not the Bucket
The Hardox 450 cutting edge and corner wear plates are replaceable, allowing the high-contact components to be serviced as they wear.
At ECHO Eqpt, we actually use and support the equipment we sell. You’re not getting generic answers, you are talking to people who understand how this equipment works in the field. That means faster answers, better recommendations, and no wasted time trying to figure things out on your own.
We’re easy to work with. If something breaks, tell us what actually happened and be honest with us (a good sense of humor doesn’t hurt either). We’re often known to help out even outside of standard warranty terms. And if it’s on us, we’ll own it and make it right. No excuses, no finger pointing - just real support when it matters.
Shipping & Freight Delivery | Returns, Refunds & Cancellations | Terms & Conditions of Sale | Privacy Policy
Iowa eCommerce Website by Wapiti Digital
