The ES HD Brush Cutter has universal skid steer quick attach and is a direct drive cutter with 3-hardened steel blades. Our ¾” single fly wheel was specifically designed to maximize RPM spool up and allow for quick recovery and the highest efficiency in the market.

These are manufactured in the USA exclusively for ES Attachments. Comparable, if not BETTER than, MTL, Blue Diamond, and Rut brush cutters - without the wait time. Plus, AMAZING customer service!

The ES HD Brush Cutter is perfect for clearing land, debris, brush, fence rows, and small to medium sized trees up to 8 inches. These are designed to be run in standard flow. If you are wanting to run this unit in high flow, please call our office to discuss possible options.

Specs

• 1/4” steel deck plate with extra heavy duty push bar
• Open front face design
• 2” drive shaft
• 3 hardened steel blades- 5″ x 1/2″
• Grease filled drive, with greaseable zerk fittings
• 160 cc motor for machines 15-26 GPM
• Steel runners on each side for ease of use over multiple terrains
• Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
• Weight: 1365 lbs

Please note: Measurement from the bottom of the quick attach plate to the ground is 8″.

These come manufactured to work on standard flow only. If you have a high flow only machine, or would be running your brush cutter on high flow only, you will need to purchase our 72″ Extreme Brush Cutter.

Bi-Directional operation – the ES HD Brush Cutters cut in both directions (reversible) when used with a standard flow machine.

We also have barb wire/wire wrap prevention studs on the underside of all cutters

Designed for machines with 15-26 GPM flow rate. If your machine has a higher GPM you will need our 72″ Extreme Brush Cutter. If you have any questions, please contact the office so we can discuss the best possible unit for your machine.