The M&M Hydra-Saw is built for skid steer and compact track loader operators who want fast tree cutting, flush ground-level cuts, limb cutting ability, and stump treatment in one attachment. Instead of using shear jaws, the Hydra-Saw uses a disc saw setup with replaceable carbide teeth to cut through trees quickly and cleanly.

The Hydra-Saw is available in two models: the TS42 and the TS30. The TS42 is the larger, high-flow model with a 30" cutting capacity and 10-gallon spray tank. The TS30 is the lighter, more compact model with a 22" cutting capacity and 7-gallon spray tank. Both models are built for tree removal, fence line clearing, pasture cleanup, trail maintenance, right-of-way work, and land management jobs where speed and clean cutting matter.

Features

• Disc Saw Cutting: Uses a high-speed disc saw to cut trees quickly instead of pinching through material like a shear.
• Two Model Choices: TS42 is the larger 30" capacity model, while TS30 is the lighter 22" capacity model.
• High-Flow Performance: TS42 runs at 30 to 45 GPM, while TS30 has 17 to 23 GPM and 23 to 35 GPM flow options.
• Fast Disc Speed: Both models run at 400 RPM at their listed flow rates.
• Built-In Spray Tank: Spray tank helps treat fresh-cut stumps during clearing work to reduce regrowth.
• Flush Cutting Design: Helps cut close to ground level for cleaner cleanup and easier mowing later.
• Replaceable Carbide Teeth: Serviceable teeth help keep the saw cutting properly over time.

Two Model Options

Choose the TS42 for larger machines and higher production cutting, or the TS30 for a lighter, more compact saw setup.

High Cutting Capacity

The TS42 cuts up to 30" without repositioning, while the TS30 cuts up to 22" without repositioning.

Flush Ground-Level Cuts

Cuts close to the ground to leave a cleaner finish for trails, fence rows, pastures, mowing areas, and property cleanup.

Built-In Spray System

The TS42 includes a 10-gallon spray tank, and the TS30 includes a 7-gallon spray tank for treating fresh-cut stumps.

• Land clearing contractors cutting trees, trimming limbs, and cleaning up overgrown property.
• Farmers and ranchers clearing fence rows, pastures, waterways, trails, and field edges.
• Municipal and right-of-way crews maintaining roadsides, parks, ditches, and utility paths.
• Property owners opening trails, cleaning wooded lots, managing hunting land, and removing unwanted trees.

• TS42 Weight: 1,750 lbs
• TS30 Weight: 1,000 lbs
• TS42 Flow Rate: 30 to 45 GPM
• TS30 Flow Rate: 17 to 23 GPM or 23 to 35 GPM
• TS42 Cutting Capacity: 30" without repositioning
• TS30 Cutting Capacity: 22" without repositioning
• TS42 Disc Speed: 400 RPM at 37 GPM
• TS30 Disc Speed: 400 RPM at 23 GPM
• TS42 Spray Tank Capacity: 10 gallons
• TS30 Spray Tank Capacity: 7 gallons

Note: Match the model to your machine’s hydraulic flow, lift capacity, and operating weight. The TS42 is best for larger high-flow skid steers and CTLs. The TS30 fits a wider range of machines with proper flow and capacity.

Common Compatible Skid Steer Models

Bobcat: S650, S740, S76, S770, S86, T650, T66, T76, T770, T86, A770

CAT: 242D3, 246D3, 262D3, 272D3, 279D3, 289D3, 299D3, 299D3 XE, 255, 265, 275, 285, 285 XE

John Deere: 324G, 330G, 332G, 333G, 331P, 333P, 335P, 325G, 331G

Kubota: SSV75, SVL75-3, SVL95-2s, SVL97-2

New Holland: L328, L334, C332, C337, C345, C362

Case: SR240B, SV280B, SV340B, TR310B, TV370B, TV450B, TV620B

Takeuchi: TL10, TL12, TL12V2, TL12R2, TL12V3

ASV: RT-75, VT-70, RT-120, VT-100, RT-135

Gehl: V270, V330, VT320, RT255

JCB: 270, 300, 3TS-8T, 3TS-8W

Manitou: 2700V, 3300V, 3200VT, 4200V

Mustang: 2700V, 3300V, 3200VT, 4200V

Wacker Neuson: ST45, ST50, SW24, SW28, SW32

Volvo: MC115C, MCT125C, MCT135C

What is the difference between the TS42 and TS30 Hydra-Saw?

The TS42 is the larger model. It weighs 1,750 lbs, requires 30 to 45 GPM, and cuts up to 30" without repositioning. The TS30 weighs 1,000 lbs, has lower flow options, and cuts up to 22" without repositioning.

Which Hydra-Saw model should I choose?

Choose the TS42 if you have a larger high-flow machine and need maximum cutting capacity. Choose the TS30 if you want a lighter saw with strong cutting capacity for smaller machines or tighter clearing jobs.

What hydraulic flow does the TS42 need?

The TS42 needs 30 to 45 GPM and runs at 400 RPM at 37 GPM.

What hydraulic flow does the TS30 need?

The TS30 is available with 17 to 23 GPM or 23 to 35 GPM flow options, and runs at 400 RPM at 23 GPM.

How big of a tree can the Hydra-Saw cut?

The TS42 can cut up to 30" without repositioning. The TS30 can cut up to 22" without repositioning.

Is the Hydra-Saw spray tank included?

Yes. The TS42 has a 10-gallon spray tank, and the TS30 has a 7-gallon spray tank for stump treatment.

Is this better than a tree shear?

Choose the Hydra-Saw if you want saw-style cutting, higher cutting capacity, and clean stump cuts. Choose a shear if you prefer a simpler pinch-cut attachment for smaller trees or grapple control.

What size machine should run it?

The TS42 should be matched with larger high-flow skid steers or compact track loaders. The TS30 is lighter and can fit more machines, but still needs the right hydraulic flow, lift capacity, and machine weight.

M&M Attachments are backed by a   limited manufacturer warranty   covering defects in materials and workmanship for the original purchaser.

• Structural components and hydraulic cylinders are typically covered for  1 year  under normal use
• Gearboxes and drive components are covered, with wear items (such as seals) considered maintenance after the initial period
• Warranty applies to properly operated and maintained equipment within recommended hydraulic and usage specifications

This warranty does not cover damage caused by misuse, improper installation, normal wear and tear, or operation outside of rated capacities.

All warranty claims are handled through Echo Equipment, where you’ll work directly with our team to get issues resolved quickly without the runaround.